LAVA IRIS X8Q S114 Flash File 100%TESTED FIRMWARE Without Password
LAVA X8Q_S114_MT6582 Flash File 100%TESTED FIRMWARE Without Password Dead Recovery FLASH FILE CAMERA FIX FIRMWARE ROM
Description
Lava Iris X8Q S114 MT6582 Official 1000% Tested By Aysha Telecom Rom Free Download. So GSm Friends Use this Flash file Trustfully. But before use confirm use build version. Lava Iris X8Q was also tested by our various site member and they reported that it’s 100% working firmware rom.
Build Version: MT6582__LAVA__iris_X8q_S114_iris_X8q__4.4.2__ALPS.KK1.MP1.V2.12
 |
 |
| aysha telecom |
~~~~~~~~~~~~~~~~~~~~
Admin: GSM Mahbub Ahmed
📞 Call: 01715294517 – 01722497172
📞 Call: 01715294517 – 01722497172
~~~~~~~~~~~~~~~~~~~~
MT6582__LAVA__iris_X8q__4.4.2__LAVA_iris_X8q_82M_INT_S114_20151124__KOT49H__iris_X8q
>USB Driver Download Link: Click Here to Download
>Sp Flash Tools DL link: Click Here To Download
>Unzip Software DL Link: Unzip Click Here to Download
How to Flash scatter Rom:
Step 1: Download and extract with winrar the stock Rom on your computer.
Step 2: After extracting you will find the Firmware file, SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers.skip if drivers are already installed on your computer.
Step 4: Open the SP Flash Tools and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Cable.
Step 6: Click on Upgrade or Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Sign will appear at the screen and device will successful Flash.
Step 2: After extracting you will find the Firmware file, SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers.skip if drivers are already installed on your computer.
Step 4: Open the SP Flash Tools and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Cable.
Step 6: Click on Upgrade or Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Sign will appear at the screen and device will successful Flash.
- How To Flash
- 1.Download and extract Model flash file on your Computer.
- 2. Install Mediatek MTK USB driver (skip if already installed).
- 3: Open SP Flash Tool and load the MT6737 Scatter file from the Firmware.
- 4: Click on Upgrade / Download button in Flash Tool for begin the flashing.
- 5: Connect your device to the Computer using USB cable in Power off mode.
- 6: Now wait 5-10 minute for the Download OK message until during the flashing process.
- গুরুত্বপূর্ণ তথ্য
- আপনার স্মার্টফোনে Flashing বা ফার্মওয়্যার ইনস্টল করার আগে আপনার ব্যক্তিগত ডেটা ব্যাকআপ নিন। যেহেতু এটি যেকোনো জিনিস ভুল হয়ে গেলে ব্যক্তিগত তথ্য পুনরুদ্ধার করতে সহায়তা করে .
- Important Notes !
- Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens
No comments