Huawei Nova7 Clone Stock room Flash File | Customer Care Firmware

Huawei Nova7 Clone Customer Care Firmware 

 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM12)

 Boot mode: Preloader

 BBCHIP: 6572 0 ca00

 Using Algo 1.

 Phone detected...Please wait

 Sending DA agent, please wait...

 ----------------------------------------------------

 BaseBand CPU :MT6572

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

 ----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 256 MB  DRAM

 ----------------------------------------------------

 NAND: (4Gb+2048Mb) [HYNIX] H9DA4GH4JJAMCR_4EM 

 BOOT STYLE : NAND BOOT

 Size: 0x20000000       [0.500 GB]

 BlockSize: 0x20000  PageSize: 0x800    SpareSize: 0x40    

 Searching partiton table, wait..

 Offset: 0x1f5e0000      

 Status: USB_HIGH_SPEED

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detected : MediaTek DA USB VCOM (Android) (COM13)

 IMEI[1]: xxxxxxxxxxxxxxx

 IMEI[2]: xxxxxxxxxxxxxxx

 Start dumping flash, this can take up to 1 hour.......

 Dumping Preloader.

 Partition: PRELOADER

 Partition: PRO_INFO

 Partition: NVRAM

 Partition: PROTECT_F

 Partition: PROTECT_S

 Partition: SECCFG

 Partition: UBOOT

 Partition: BOOTIMG

 Partition: RECOVERY

 Partition: SEC_RO

 Partition: MISC

 Partition: LOGO

 Partition: EXPDB

 Partition: FAT

 Partition: ANDROID

 Partition: CACHE

 Partition: USRDATA

 Partition: BMTPOOL

 Start processing proinfo.bin ......

 Reading:  BEGIN: 0x100000         - LEN: 0x100000        

 Start processing nvram.bin ......

 Reading:  BEGIN: 0x200000         - LEN: 0x300000        

 Start processing protect1.img ......

 Reading:  BEGIN: 0x500000         - LEN: 0x300000        

 Start processing protect2.img ......

 Reading:  BEGIN: 0x800000         - LEN: 0x300000        

 Start processing UBOOT 

 Start processing BOOTIMG 

 Start processing RECOVERY 

 Start processing SEC_RO  secro.img

 Reading:  BEGIN: 0x17c0000        - LEN: 0x40000         

 Start processing LOGO ......

 Start processing FAT 

 Reading:  BEGIN: 0x1bc0000        - LEN: 0x1400000       

 Start processing system

 Reading:  BEGIN: 0x2fc0000        - LEN: 0x11800000      

 Start processing CACHE 

 Reading:  BEGIN: 0x147c0000       - LEN: 0x700000        

 Start processing USRDATA 

 Reading:  BEGIN: 0x14ec0000       - LEN: 0xa700000       

 Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6572_NAND_2021_04_07_11_45)

 Wait untill phone will start charging.

 [0]All done.

Huawei Nova7 Clone Stock room  Flash File 

Rom Name & Model	Huawei Nova7 Clone_ Flash File
Supported Device	Huawei Nova7 Clone
Phone OS Version	Android 10.0
Rom Size	1.GB
ROM Type	Official
Rom Chipset	Mediatek (MT6572)
Required Tool	SP Flash Tool
Required Driver	MediaTek USB Driver
Uploaded On	Mega
Rom situation	Only For Premium Paid User

Admin: GSM Mahbub Ahmed
Just Whatsapp Call

📞Whatsapp+imo: 01722497172-

Huawei Nova7__Privacy Lock  FRP Remove Firmware

Download Firmware

Make Sure That Your Phone Have Software Issue. Because of that, Huawei Nova7 Flash File ROM Will Solve Only Software Related Issues. If Your Huawei Nova7 Phone Have Hardware Issue, Then your Problem Will Not Solved. On the other hand, If Your Mobiles CPU or EMMC IC was Damaged then Our Huawei Nova7 Firmware & We are Not Responsible for Anything wrong Happened After Flashing. So Check Your Phones EMMC IC and CPU Before Start the Flashing Process for Your Safety.

How To Bypass  FRP Lock Huawei Nova7 Without Box

On this Post, We Have Also Shared Huawei Nova7 Frp Reset File For Convenience of Our Customers. IF FRP Lock or Google Account Lock Appeared After Making Factory Reset On your  Huawei Nova7  Mobile. Then You Needs to Bypass or Remove the FRP Lock From your Huawei Nova7 Device. On the other hand, You Don’t Have Any Professional Flashing or Unlocking Device, Then Don’t Worry About This.

You Can Unlock or Remove FRP Lock From Your Huawei Nova7 Device Without Any Device. You can Remove the Lock By Using SP Flash Tool. Download SP FLASH TOOL From Our Download Link or Click HERE

We are Providing You Huawei Nova7 FRP Bypass Solution With a Small Modified FRP Reset File And Tool. This Method Will Save Your Valuable Time & Internet Cost.

Following Problems Will be Solved By This Firmware?

• Huawei Nova7 Firmware Rom Will Solve All Software Issues.
• Fastboot Mode, Tool DL Image Fail, Recovery Mode Fixed.
• Frp Lock Remove or Google Account Lock Removed.
• Network Lost Because of Imei or Baseband Fixed.
• Display/Lcd Blank or White After Flashing Fixed.
• Any Kind Of Lock or Security Problem Fixed.
• SP Tool Error or NV Error Fixed.
• Stuck on Logo or Restart Fix.

Requirements To Flash Huawei Nova7 Firmware.

• PC Or Laptop With Windows Setup.
• Huawei Nova7 Flash File ROM.
• MTK USB Driver.
• SP Flash Tool.
• Detectable USB Data Cable.
• At Least 50% of Battery Backup.

Note Before Flashing!

After Installing Huawei Nova7 Stock ROM or Update Will Erase All kind of Your Personal Data Permanently. So, If you Don’t Want to Take any kind of risk with your required data, Then Take Backup Your Personal Data. How This Will Help You? See with Details…

Stock ROM Backup: Making Backup of Huawei Nova7 Stock Firmware ROM Will Help you If Any Kind of Wrong Happened After Installing Stock ROM On your Huawei Nova7 Smartphone. You Can Recover Your Device Easily To the Back Condition With the Backup Firmware. Some Professional Tools or Devices Can Help You For Taking Backup of Your Huawei Nova7 Stock ROM.

Personal Data Backup: Taking Backup of Personal Data is the Instruction To the User or Customer of the Huawei Nova7 Mobile. Installing Stock ROM Will Erase All Sort of Personal Data of the Device & Make it neat and Clean. For this reason, All Personal Data of the User or Customer Will Be Erased.

Instruction To Flash & Install Stock ROM On Huawei Nova7

Installing Stock ROM On Huawei Nova7 is a Very Easy Step For The Mobile Technician. But If you are not a Mobile Technician then Don’t Try To Do these Steps. IF you Want then can Try With Your Own Risk.

• Download Huawei Nova7 Firmware Package From The Link.
• Download & Install USB Driver or Click HERE.
• Extract The Firmware Zip-On PC.
• Open SP Flash Tool.
• Click On Scatter-Loading Icon.
• Select The Scatter File of Huawei Nova7
• Wait a Few Seconds For Loading Firmware.
• Press The Download Button.
• Turn Off Your Huawei Nova7 Mobile.
• Press Boot Key If Needed.
• Connect With your Computer.
• A Green Windows Will Appear After Flashing.
• Then Job Done.

This Flashing Guide Hopefully Will Helpful For Installing Stock ROM On Any Mediatek Device. This Method is Full Free & Without Any Kind of Cost. By Following this Huawei Nova7 Flashing Guide any Kind of Professional Flashing Device are Not Needed. As a result, It is More Easier for Technicians.

Responsibility To the Customers: We have Already Described Our Responsibility About The ROM. We are Again Describing That AndroidFlashFirmware will not be Responsible for any kind of Error issues that Appeared After Flashing or During Flashing Process. Try This Flashing Proceed at your own risk. Thanks For Visiting Our Site.

Huawei Nova7 Flash File 10.0 100% Stock Room Customer Care Flash File | By Aysha Telecom